Set of 2 Deck Plates
Purchase one set of Deck Plates for every deck you want to set up with the Qlik System.
6 Hole Pattern Plates
MOUNTING HARDWARE AND SPRUNG LOCK BARS INCLUDED
**Truck plates are needed to complete the Qlik System™**
Spec Notes
Deck Plates Use Both New School 2.125" Bolt Pattern & Old School 2.5" Pattern
The provided 10-32 hardware is for standard 7-ply maple decks ( approx. 3/8" -7/16" thick) If your deck is thinner or thicker you will require the appropriate length hardware to mount the deck plate correctly. 10-32 hardware is readily available from most hardware stores in the USA.
Do not mount Qlik System on decks that are drilled improperly or convex in the mounting area. The deck must be flat on the truck mounting surface for Qlik System to work properly. (Be sure to check for flatness on your deck both front to back and side to side before installation)
MADE IN THE USA
